Precautions During Use Of Flake Ice Machine 30 Tons

1. The Flake Ice Machine 30 Tons should use a water source that meets the local drinking water standards and install filters to remove impurities from the water, avoid clogging the water pipes, contaminate the water tank and ice molds, and affect the ice making performance. The water temperature is at least 2 °C, the highest is not more than 35 °C, the water pressure is at least 0.02 Mpa, and the highest is 0.8 Mpa.

2. The ice machine must unscrew the inlet hose head for two months to clean the inlet valve screen to prevent the sand mud impurities from clogging the water inlet, which causes the water intake to become smaller, resulting in no ice. Although the ice machine will discharge the cooled residual water in the water tank at the end of each ice making process to achieve the cleaning effect, it can effectively reduce the scale generation in the evaporator and water circulation system, but generally six months. Left and right, also use the ice machine cleaning agent and disinfectant to clean and disinfect the water pipe, sink, storage refrigerator and water retaining plate, and rinse, the ice cubes generated during the cleaning process can not be eaten. When not in use for a long time, it should be cleaned, and the ice mold and the moisture in the box should be dried with a hair dryer, and placed in a place free of corrosive gas and ventilated and dry, to avoid open storage.

3. Care should be taken when handling the ice machine to prevent severe vibration. The handling inclination should not be less than 45 degrees. After long-distance transportation, the ice machine should be placed for 2-6 hours before the mechanism ice can be opened.