What Is The Cause Of The PLC Controller Flake Ice Machine?

There are several reasons for this:

1. The pressure of the refrigerant is too high or too low, causing the compressor to work abnormally.

2. The refrigerant pipeline has gas or debris, or the pipeline is deformed.

3. If the PLC Controller Flake Ice Machine is air-cooled, it may be because the fan appliance is broken, the rotation is slower, so the heat dissipation effect is not good, resulting in slow ice making. If the time is long, the compressor may be burned out.

4. Insufficient refrigerant (this deficiency is not leaking normal operation or consumption); too much refrigerant, which will affect the ice making efficiency of the ice machine

5. The ambient temperature is too high. The best effect of the ice machine buy from PLC Controller Flake Ice Machine Supplier is of course the lower the environment, the better the ice making effect. Therefore, when the ambient temperature is too high, the ice making efficiency will also be affected. Generally, the ambient temperature is preferably controlled at 35 degrees Celsius. Within

6. The working point of the ice machine The ice machine should be placed in a place where ventilation is easy to dissipate. If it is stuck in the corner, it will seriously affect the performance of the ice machine.